Tap connector, threadless adaptor (1345) In Stock Now

Tool: Threadless Tap Connector 

• For attachment to 20-24mm threadless taps (taps that DON'T have ridges for a screw-connection)
• Flexible tap connector for attachment to threadless taps with a diameter of between 20-24mm.
• Ensure connector is correct size for the tap before use.
• Always make sure it is fully secured and leak test with low water pressure before use.
• To fit loosen jubilee clip, Work connector over the end of tap, making sure its firmly seated(heat connector in warm water to make this easier).
• Once fitted tighten the jubilee clip to secure.Do not overtighten as this may damage the connector or the tap, and ruin it for the next borrower.
• Turn water on and slowly increase to ensure there are no leaks.
• Not recommended for indoor use, if using indoors make sure the connector is not left unattended.
• Warning: Connector may detach if pressure is too high. Severe electrical shock could result if water is sprayed into outlets or sources of electrical current. Do not use water over 46°C
• Available to you in a classic black, with contrasting silver accents; charmingly versatile.
  
  
  

Glasgow Tool Library did not create this content and can not verify the expertise of the host, we ask that you use your own judgment in following any advice offered and avoid practices that would put yourself or anyone else in danger.